|
General Rifle Work |
|
|
Complete
disassemble, cleaning, inspection, oil and reassemble |
|
Bolts |
$40.00 |
|
Pumps, autos, levers |
$50.00 |
|
Check headspace |
$25.00 |
|
Make chamber cast |
$35.00 |
|
Cut and crown barrel |
$50.00 |
|
Forge bolt handle |
$100.00 |
|
Weld or silver solder new bolt and handle (labor only) |
$125.00 |
|
Lap bolt lugs (may require rechambering) |
$45.00 |
|
True bolt breech face |
$45.00 |
|
Install short chambered, pre-threaded barrel and
headspace |
$120.00 |
|
Fit barrel blank to an action (includes finish chamber,
barrel crown, matte finish, and hot blue |
$225.00 |
|
Accuracy Job (chamber and fit barrel blank to the
action, lap bolt lugs, true bolt face, straighten barrel
threads, surface receiver face, crown barrel, matte
finish, and hot bluing) |
$275.00 |
|
Install a muzzle brake on upto a #5 barrel (brake extra) |
$125.00 |
|
Install a muzzle brake on a #6 to a bull barrel (brake
extra) |
$150.00 |
|
Lap a factory barrel |
$65.00 |
|
Remove a stuck or live round from the chamber or a bore
obstruction |
$35.00 min |
|
Adjust factory bolt action trigger (Remington,
Winchester, Browning, Savage, 3 lb. min) |
$50.00 |
|
Adjust a Ruger 77 or 77/22 trigger |
$65.00 |
|
Trigger adjustment on a Ruger 10/22 (includes deburring,
setting trigger to 3 - 3½
lbs, trigger stop, auto bolt release conversion) |
$45.00 |
|
Match trigger job on a 10/22 (includes 2 - 2½
lb trigger job adjustable sear, trigger and hammer
shims, trigger overtravel screw, extended mag release,
auto bolt release conversion) |
$80.00 |
|
Ruger 10/22 bolt tuneup (includes squaring the face of
the bolt, setting the head space at .0425, inserting a
hardened pin above the firing pin in the bolt, jeweling
the bolt) |
$50.00 |
|
Stock Work |
|
|
Glass bed a barreled action in a finished stock |
$85.00 |
|
Install aluminum pillars and glass bed |
$120.00 |
|
Install a recoil pad (labor only) |
$40.00 |
|
Install sling swivels (Michaels type) |
$20.00 |
|
Install a barreled action in a composite stock |
$75.00 |
|
Fit a barreled action to a 95% stock and oil finish
(does not include checkering or a recoil pad) |
$50.00/hr |
|
I will
build complete rifles in any configuration desired. If
you are interested, please contact me and I will be
happy to discuss it with you.
|